Maintenance of way about concrete mixer can’t start

Concrete mixer can’ t start or open, most industrial scale concrete mixers using a 5-10 hp two-stroke engine similar to a lawn mower or kart engines. Over time, the engine development of the most common problems with the use of these types of oil pollution magnetic spark plug has stopped working.

 

To determine if a foul spark plug is the culprit concrete mixer, using (usually) a ratchet slot and remove, there is a gap between the center electrode and the spark plugs and validation plug body. If not, replace the plug. If the spark plug is no problem, No. 2 Phillips screwdriver into the spark plug boot until its internal electrode contact. Hold the handle of a screwdriver, screwdriver very close, but not touching, sheet metal engine and pull the power cord or turn the key.

If you do not see a spark, then a bad sector or need to be replaced. If these two cases, you will need to purchase a repair manual for specific engine power concrete mixer detailed step by step instructions, troubleshooting and replacing magnetic.

Pre: The use of sensors in concrete equipment
Next: Detail instruction about concrete mixer blades working