Methods of Reducing Abrasion and Enhancing Productivity of Concrete Mixer

In the use process of the concrete mixer, the abrasion of concrete mixer can not be avoided and the abrasion can affect the productivity of equipment. Therefore, in the process of production, the most important thing is to reduce the abrasion of concrete mixer as far as possible.
So, how to reduce the abrasion of cement mixer and enhance the productivity.
 First of all, the lubrication of the concrete mixer. There are many locations to lubricate and the approach and amount of adding lubricant oil are quite different. Sometimes, it is necessary to change a new lubricant oil and add lubricant oil in a quantitatively and regularly. Users must know clearly about the lubrication technology and guarantee the lubrication of concrete mixer.
 The components which are easy to abrade are vibrating screen, mixing blade, surface, and mixing drum. How to reduce the abrasion? The key to the abrasion of vibrating screen is vibrating bearing. The high quality bearing is necessary, the lubricating device is reasonable and the user should lubricate the equipment frequently. As the beton mixer uses the mixing blades to mix concrete, the abrasion of mixing blades is often very serious. In order to avoid the condition, the large hard object and steel wire are forbidden and the mixing drum should be examined frequently. The possible reasons of the abrasion of concrete mixer on the surface are slight shock, sliding, impact, scratch and rusting, which requires user to avoid collision, keep the surface clean and dispose the rust in time. The frequent abrasion of mixing drum requires user to clean mixing drum instantly after work to avoid the solidification of concrete on the mixing drum.