Dry mix concrete batch plant regularly check Precautions

Concrete mixers items should be checked every week :
Check the concrete batching mixing plant rope wear and coated with a little oil in it showed , rope wear to a certain extent , it should be replaced.
Check the gearbox oil level , oil pump , check the lubrication of wheel bearings and pulleys to the hopper filling oil bearing .
To maintain a clean water supply device , to prevent blockage of the suction check valve cleaned once . Check the limit switch arm is loose , loose , if necessary, should be adjusted .
Check the dry mix concrete batch plant leaf bolts , support arm connecting bolts are loose discretion to adjust the gap between the blade and the cylinder walls of the maximum gap 5mm and tighten as necessary .
Check the electrical box concrete mixer contactor contact situations .
Twist open the blockage , check the shaft seal , make the necessary adjustments to the repair and replacement.
Mmall concrete batching plant project should be checked regularly :
On the hoist brake check and make appropriate adjustments.
The pump , throttle check whether there is water leakage.
Check off lubricate gears and adjust the belt tension .
Check the concrete mixer blade , liner wear and replace appropriate.