Inventory of the routine maintenance of the cement mixer

As everyone knows, is the use of motor concrete mixer machine, generally for single-phase series excitation type or servo type miniature motor drives a stirring rod rotation and complete mixing task. By constantly in operation, which leads to the key parts of the concrete mixing station easy problems, if you usually pay no attention to maintenance and maintenance, etc. the loss outweighs the gain. The problem is, we will come to have a look of the concrete mixing station "periodic inspection, forced maintenance, repair as" specific requirements.
1 cleaning tank (concrete mixing drum) and inlet and outlet
Because of the concrete in a short time will solidify into lumps, and paint on steel and have a certain corrosive, so every time the use of concrete tank, cleaning adhesion is daily maintenance must seriously work carried out in concrete tank and the inlet and outlet of the concrete. Including:
A. each charge before flushing with water inlet, the inlet when in charging moist;
B. filled with water to clean water tank truck comes in charge at the same time;
C. charging after flushing inlet, wash the feeding near the mouth of the residual concrete;
D. to the site after unloading, flush out the trough, and then to the concrete tank with clean water 30 - 40 L; in the back of the vehicle
Keep the concrete tank forward slowly rotation process;
E. the next charging before you go concrete tank of sewage;
F. the end of each day when thoroughly clean the concrete tank and inlet and outlet around, guarantee not to stick with cement and concrete block.