Tips on self-loading concrete mixer maintenance

The maintenance of concrete mixer is very important to owners. Only in a correct way, can ensure the concrete mixer used a long time. Now Bona tells you some tips about self-loading concrete mixer.

2.       Check oil and circuits and control equipment on each lubrication, add oil as required.

3.       Before class work, add water while stirring cylinder riddling a 1 - to2min, while checking the reliability of the clutch and brake work.

4.       During the Concrete mixer operation, operators should be ready to listen to whether the noise of the motor, reducer, transmission gear is normal, and observe whether the temperature is too high.

5.       After the end of the working class, operators  should be cleaned concrete mixer carefully.

If the operators pay attention to these aspects, the concrete mixers will service a long time for us.

Pre: Drum concrete mixer operating characteristics introduction
Next: Common failures and solutions about JS twin shaft concrete mixer